Sismik Wireless Contactless Communication Gas Alarm Detector

Methane, LPG and Natural Gas Alarm Detector - "Wireless and Non-contact ONLY ALARMS"

What does it do?

Seismic gas gas detection devices produced according to TSE EN 50194-1 Standard; Detect toxic and flammable gases in all kinds of residential, workplace and similar places and give audible and illuminated warnings. In case there is a gas leak above the 7%LEL (±0.4%LEL) limit in the environment, thanks to the contact outlet; It allows it to work by sending signals to systems such as horn, siren, gas shut-off valve (solenoid valve).

________________________________________

technical specifications

• Working voltage : Input; 230VAC 50Hz

* Output Voltage: 230VAC 50Hz

• Working Power(Stand by): 2.5W

* Device Type: Type A

* Calibration Time: Between 20 - 60 sec

* Buzzer Sound Output: 85 dB

* Sensor Measurement Standard: TSE EN 50194-1

* Sensor and Device Life: 5 Years

* Alarm Level: Methane(Natural Gas) 7% LEL (±0.4% LEL) Gas-Methane Lower Explosion Limit.

• Operating Temperature: -20°C to 50°C

* Degree of Protection: IPX2D

* Dimensions: 68mmX112mmX38mm

* Weight: 300 gr

________________________________________

Indicator and Alarm Features

* Alarm: Illuminated indicator and audible(Red)

• Power operating indicator: The illuminated indicator lights up as soon as it is connected to the 220V system.(Green)

* Ready: When the system first starts working, it lights up between 30 seconds and 60 seconds, equivalent to the sensor heating up Dec. Illuminated indicator(Yellow)

* Fault: Lights up when any malfunction occurs on the sensor.Illuminated indicator.(Yellow)

• If desired, a test is performed to check the operability of the system after installation with the Test button.