Dry Contact Methane. LPG and Natural Gas Alarm Detector

What does it do?
Seismic gas gas detection devices produced according to TSE EN 50194-1 Standard; Detect toxic and flammable gases in all kinds of residential, workplace and similar places and give audible and illuminated warnings. In case there is a gas leak above the 7%LEL (±0.4%LEL) limit in the environment, thanks to the contact outlet; It allows it to work by sending signals to systems such as horn, siren, gas shut-off valve (solenoid valve).
technical specifications

Working voltage : Input ; 230VAC 50Hz
Output Voltage: 230VAC 50Hz
Working Power(Stand by): 2.5W
Device Type: Type A
Calibration Time: Dec.20 - 60 sec.
Buzzer Sound Output: 85 dB
Sensor Measurement Standard: TSE EN 50194-1
Sensor and Device Life: 5 Years
Alarm Level: Methane(Natural Gas) 7% LEL (±0.4% LEL) Gas-Methane Lower Explosion Limit.
Operating Temperature: -20°C to 50°C
Degree of Protection: IPX2D
Dimensions: 68mmX112mmX38mm
Weight: 300 g
Indicator and Alarm Features
Alarm : Illuminated indicator and audible(Red)
Power operating indicator: The illuminated indicator lights up as soon as it is connected to the 220V system.(Green)
Ready: When the system first starts working, it lights up for 30 seconds to 60 seconds, equivalent to the sensor heating up Dec. Illuminated indicator(Yellow)
Fault: Lights up when any malfunction occurs on the sensor.Illuminated indicator.(Yellow)
If desired, after installation with the Test button, a test is performed to check the operability of the system.